martes, 7 de diciembre de 2010

Ploprof Gen . 1 del amigo Lucho

Desde USA, el amigo Lucho presenta su Ploprof GEN 1 recientemente recibido de Bienne donde ha pasado una revisión, como se puede ver conserva el dial en unas condiciones excelentes, algo realmente dificil en las primeras unidades, las MK1, que como ya sabemos, por su compuesto se degradaba con mucha facilidad y es dificil que lleguen hasta hoy unidades en este estado.
Este reloj está datado circa 1.972.

ImageShack, share photos, pictures, free image hosting, free video hosting, image hosting, video hosting, photo image hosting site, video hosting site

ImageShack, share photos, pictures, free image hosting, free video hosting, image hosting, video hosting, photo image hosting site, video hosting site

ImageShack, share photos, pictures, free image hosting, free video hosting, image hosting, video hosting, photo image hosting site, video hosting site

ImageShack, share photos, pictures, free image hosting, free video hosting, image hosting, video hosting, photo image hosting site, video hosting site


Saludos y gracias por leer.


.

jueves, 2 de diciembre de 2010

¿ Que hacen en Suiza (Bienne) cuando llevamos un Ploprof a restaurar ?

Bueno, un Ploprof o cualquier otro Omega, pero en este caso es al que me refiero, bueno, pues siguen un protocolo adecuado al estado en que llega cada reloj y se van dando los pasos oportunos, en algunos casos, evidentemente si no es necesaria la sustitución de algunas fornituras se quedan en el reloj, algo lógico, nadie querría sustituir por ejemplo una esfera vintage con los índices con tritio por una con luminova...o tal vez sí...

Estos son los pasos que se siguen desde que un reloj Omega entra dentro de sus instalaciones en Bienne hasta que sale. :

Complete maintenance service

These are the main steps of a complete maintenance service:
1 Open the case, remove the dial and the movement

2 Disassemble the case (crystal, pushers, crown, tube, bezel etc.)

3 Restore the case and the bracelet to their original state, repair if necessary

4 Wash the case and bracelet

5 Re-assemble the case using new parts (crystal, pushers, crown, tube, gaskets etc.)

6 Remove the dial from the movement and the hands

7 Disassemble the movement into its individual components

8 Check whether the watch parts function correctly, check for rust or wear

9 Replace any faulty watch parts

10 Wash the disassembled movement in a cleaning machine with specific baths

11 Check the cleanliness

12 Assemble and lubricate the movement in accordance with the instructions (Technical Guide)

13 Adjust the movement in accordance with Omega's quality criteria

14 Fit the dial and the hands

15 Final adjustment of the movement in accordance with working directives

16 Close the case and check the water-resistance

17 Set the correct time on the watch, check the cleanliness and the functioning of the assembled watch

18 Check the precision of the rate after 24 hours. If the rate is not satisfactory, the watch is returned to the watchmaker for the necessary corrections.

19 In order to check the power reserve, allow the watch to run until it stops.

20 Fit the bracelet and carry out a final check before returning the watch to the consumer.


Y así es como puede volver...

ImageShack, share photos, pictures, free image hosting, free video hosting, image hosting, video hosting, photo image hosting site, video hosting site

ImageShack, share photos, pictures, free image hosting, free video hosting, image hosting, video hosting, photo image hosting site, video hosting site

Saludos, espero que haya sido de tu interés.


.

miércoles, 1 de diciembre de 2010

Omega seamaster 600 Ploprof del amigo rené

El amigo rené envía esta bonita foto de un excelente ejemplar de Ploprof de tercera generación, en la nieve también parece encontrarse a gusto.

ImageShack, share photos, pictures, free image hosting, free video hosting, image hosting, video hosting, photo image hosting site, video hosting site


Espero que os guste.

Thanks Rene.


.