Estos son los pasos que se siguen desde que un reloj Omega entra dentro de sus instalaciones en Bienne hasta que sale. :
Complete maintenance service
These are the main steps of a complete maintenance service:
1 Open the case, remove the dial and the movement
2 Disassemble the case (crystal, pushers, crown, tube, bezel etc.)
3 Restore the case and the bracelet to their original state, repair if necessary
4 Wash the case and bracelet
5 Re-assemble the case using new parts (crystal, pushers, crown, tube, gaskets etc.)
6 Remove the dial from the movement and the hands
7 Disassemble the movement into its individual components
8 Check whether the watch parts function correctly, check for rust or wear
9 Replace any faulty watch parts
10 Wash the disassembled movement in a cleaning machine with specific baths
11 Check the cleanliness
12 Assemble and lubricate the movement in accordance with the instructions (Technical Guide)
13 Adjust the movement in accordance with Omega's quality criteria
14 Fit the dial and the hands
15 Final adjustment of the movement in accordance with working directives
16 Close the case and check the water-resistance
17 Set the correct time on the watch, check the cleanliness and the functioning of the assembled watch
18 Check the precision of the rate after 24 hours. If the rate is not satisfactory, the watch is returned to the watchmaker for the necessary corrections.
19 In order to check the power reserve, allow the watch to run until it stops.
20 Fit the bracelet and carry out a final check before returning the watch to the consumer.
These are the main steps of a complete maintenance service:
1 Open the case, remove the dial and the movement
2 Disassemble the case (crystal, pushers, crown, tube, bezel etc.)
3 Restore the case and the bracelet to their original state, repair if necessary
4 Wash the case and bracelet
5 Re-assemble the case using new parts (crystal, pushers, crown, tube, gaskets etc.)
6 Remove the dial from the movement and the hands
7 Disassemble the movement into its individual components
8 Check whether the watch parts function correctly, check for rust or wear
9 Replace any faulty watch parts
10 Wash the disassembled movement in a cleaning machine with specific baths
11 Check the cleanliness
12 Assemble and lubricate the movement in accordance with the instructions (Technical Guide)
13 Adjust the movement in accordance with Omega's quality criteria
14 Fit the dial and the hands
15 Final adjustment of the movement in accordance with working directives
16 Close the case and check the water-resistance
17 Set the correct time on the watch, check the cleanliness and the functioning of the assembled watch
18 Check the precision of the rate after 24 hours. If the rate is not satisfactory, the watch is returned to the watchmaker for the necessary corrections.
19 In order to check the power reserve, allow the watch to run until it stops.
20 Fit the bracelet and carry out a final check before returning the watch to the consumer.
Y así es como puede volver...
Saludos, espero que haya sido de tu interés.
.
No hay comentarios:
Publicar un comentario